Get Quick Guidance

Canon MX922 Ink Cartridge


Ink cartridges carry the ink required to enable the printing functions of your printer. Your basic setup process will involve the installation of ink cartridges. It is important to maintain the ink levels in your Canon MX922 ink cartridges. You can refill the ink cartridges when the level goes down.

canon mx922 ink cartridges

How To Put Ink in a Canon MX922 Printer

    Follow the below steps to know how to put ink in a Canon Mx922 printer.
  • Connect your printer and system to a power supply.
  • Open the ink cover of your printer.
  • Let the print head holder reach the replacement position.
  • There are a few procedures involved before installing a new cartridge.
  • Remove the orange tape and protective film from the new cartridge.
  • Hold the new cartridge by using an orange cap.
  • Slowly place the Canon MX922 ink cartridge cartridge into the slot.
  • Press it and wait till the red light appears.

Canon MX922 Ink Replacement

  • Make sure the system is connected to a power source. Pull up the document cover and access the ink cover.
  • Wait till the print head holder returns to the replacement position.
  • Slowly lift the ink cartridge that has to be replaced. Remove it from the port.
  • The new ink cartridge needs to be prepared before placing it in the slot.
  • The new cartridge has an orange tape on it, remove it.
  • The protective film on the Canon MX922 ink cartridge should also be removed.
  • Use the orange cap to hold the cartridge.
  • Remove the tab on the cap. Insert the cartridge into the slot to complete the Canon MX922 ink replacement process.
  • Press the top of the cartridge. Wait till red light flashes on the lamp.

Canon MX922 Ink Refill

  • If your printer fails to print, an empty ink cartridge could be the reason.
  • Open the printer cover.
  • Remove the empty cartridge out of the slot.
  • Obtain a needle and syringe from a nearby shop.
  • Take the Canon MX922 ink cartridge, fill the sponge with few drops of ink and tape it.
  • Drill a hole beneath the label and fill the cartridge with ink using the syringe.
  • Seal the hole with hot wax or tape.
  • Take off the tape from the sponge area and place the cartridge into its slot. Follow the above steps for the Canon MX922 ink refill process.

How To Check Ink Levels On Canon MX922

Follow the below steps to know how to check ink levels on Canon MX922.
  • Turn ON your Canon MX922 printer.
  • Make sure your system is turned ON.
  • Select Printers and then other hardware. Tap on printers and faxes.
  • Place your mouse and right click on Canon MX922.
  • After setting up the Printer Driver Setup Window, launch the Canon IJ Status Monitor.
  • Wait till the maintenance tab is displayed.
  • Select View Printer Status.
  • Canon IJ Status Monitor pops up the ink status in the form of an image. Know more about Canon MX922 ink cartridge from our experts.
How To Check Ink Levels On Canon MX922